Table of Contents - PLAXIS 3D Output commands documentation

Table of Contents

add
Adds a certain criteria object to a structural plot.
addcurvepoint
Preselection of stress points or nodes for calculation results, with an indication of a preferred direction.
__allocmem
Tests if it is possible to allocate a specific amount of additional memory.
apply
Applies a command to multiple objects at once.
count
Counts the number of values in an object.
centerline
Creates a centerline defined by a sequence of coordinates.
centerlineconfig
Creates configuration for centerlines.
clearcurvepoints
Clears the preselected curve points.
close
Closes output.
commands
Displays available commands and their signatures.
crosssectionplot
Creates a plot for visualising cross section.
delete
Deletes a plot or centerline.
__dump
Displays the details of the project.
__dumpdisplacements
Displays a list of all prescribed displacements.
__dumpfixities
Displays a list of all fixities.
__dumpwaterloads
Displays a list of all water loads.
echo
Displays the details of an object.
export
Exports a plot.
filter
Filters a list of specified objects.
generate
Generates a centerline.
getcurveresults
Displays results for curve points that have been previously selected.
getcurveresultspath
Displays results for curve points that have been previously selected for several different phases.
getresults
Generates a table with the calculation results.
getsingleresult
Gives the result at the specified coordinate or a specific node/stress point with or without result smoothing.
hide
Hides elements in a plot.
index
Displays the value at the given index.
info
Displays all commands and attributes for an object.
linecrosssectionplot
Creates a cross section plot defined by a line between two specified points.
__raise
Generates an error in order to test the error catching functionality.
__raiseasync
Generates an error in an asynchronous thread in order to test the error catching functionality.
__raisethreaded
Generates an error in a synchronous thread in order to test the error catching functionality.
rename
Renames an object.
__reportmem
Reports memory usage
set
Sets one or more properties of one or more objects
setproperties
Changes properties of objects.
__setphysicalcpucount
Displays or sets the amount of physical and logical CPUs.
__sleep
Sets the number of milliseconds for computer to do nothing.
show
Shows elements in a plot.
slice
Selects results from a list of objects with a specified criterion.
structureplot
Creates a plot for structural elements.
structuralforcesplot
Creates a plot for visualizing structural forces.
structuralforcesinvolumepilesplot
Creates a plot for visualizing structural force in volume piles.
structuralforcesinvolumeplatesplot
Creates a plot for visualizing structural force in volume plates.
tabulate
Displays a table with specified objects and their properties.
__testasync
Tests that asynchronous task execution works correctly.
update
Saves the selected curve points and closes output.
zoom
Zooms in a plot.
view
Changes the view of a plot.