addcurvepoint acp
Preselection of stress points or nodes for calculation results, with an indication of a preferred direction.
Preselection of stress points or nodes for calculation results.
addcurvepoint "Node" (3 5 7)
Preselects node that is closest to the coordinates (3 5 7).
addcurvepoint "Rigid body" (0 1 2)
Finds the rigid body closest to position (0 1 2).
<Text: "Node"|"Stress point"|"Material point"|"Rigid body"> <Coords: Number' Number' Number'>'
| Text | Type of point to be selected | |
| "Node" | Node | Select a node |
| "Stress point" | Stress point | Select a stress point |
| "Material point" | Material point | Select a material point |
| "Rigid body" | Rigid body | Select a rigid body |
| Coords | Coordinates of node or stress point | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Number | z | z-coordinate |
| Mode | Target |
|---|---|
| - | Global |
Preselection of stress points or nodes for calculation results.
addcurvepoint "Node" Soil_1_1 (3 5 7)
Preselects node from the soil cluster Soil_1_1 that is closest to the coordinates (3 5 7).
addcurvepoint "Stress point" Soil_1_1 (1 3 0)
Preselects stress point from the soil cluster Soil_1_1 that is closest to the coordinates (1 3 0).
<Text: "Node"|"Stress point"|"Material point"|"Rigid body"> Entity' <Coords: Number' Number' Number'>'
| Text | Type of point to be selected | |
| "Node" | Node | Select a node |
| "Stress point" | Stress point | Select a stress point |
| "Material point" | Material point | Select a material point |
| "Rigid body" | Rigid body | Select a rigid body |
| Entity | Entity | The entity from which the node or stress point must be selected |
| Coords | Coordinates of node or stress point | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Number | z | z-coordinate |
| Mode | Target |
|---|---|
| - | Global |
Preselection of stress points or nodes for calculation results with an indication of a preferred direction for cases with multiple points near the specified coordinates.
addcurvepoint "Node" (3 5 7) (0 1 0)
Preselects node that is closest to the coordinates (3 5 7) in the direction of vector (0 1 0).
<Text: "Node"|"Stress point"|"Material point"|"Rigid body"> <Coords: Number' Number' Number'>' <Coords: Number' Number' Number'>'
| Text | Type of point to be selected | |
| "Node" | Node | Select a node |
| "Stresspoint" | Stress point | Select a stress point |
| "Materialpoint" | Material point | Select a material point |
| "Rigid body" | Rigid body | Select a rigid body |
| Coords | Coordinates of node or stress point | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Number | z | z-coordinate |
| Coords | Directional vector | |
| Number | x | x component of vector |
| Number | y | y component of vector |
| Number | z | z component of vector |
| Mode | Target |
|---|---|
| - | Global |
Preselection of stress points or nodes from an entity for calculation results with an indication of a preferred direction for cases with multiple points near the specified coordinates.
addcurvepoint "Node" Soil_1_1 (3 5 7) (0 1 0)
Preselects node from the soil cluster Soil_1_1 that is closest to the coordinates (3 5 7) in the direction of vector (0 1 0).
<Text: "Node"|"Stress point"|"Material point"|"Rigid body"> Entity' <Coords: Number' Number' Number'>' <Coords: Number' Number' Number'>'
| Text | Type of point to be selected | |
| "Node" | Node | Select a node |
| "Stress point" | Stress point | Select a stress point |
| "Material point" | Material point | Select a material point |
| "Rigid body" | Rigid body | Select a rigid body |
| Entity | Entity | The entity from which the node or stress point is to be selected |
| Coords | Coordinates of node or stress point | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Number | z | z-coordinate |
| Coords | Directional vector | |
| Number | x | x component of vector |
| Number | y | y component of vector |
| Number | z | z component of vector |
| Mode | Target |
|---|---|
| - | Global |
Preselection of stress points or nodes from an entity for calculation results.
addcurvepoint RigidBody_1_2
Preselects node from the RigidBody_1_2.
Entity'
| Entity | Entity | The entity from which the node or stress point is to be selected |
| Mode | Target |
|---|---|
| - | Global |