Table of Contents
- add
- Adds a certain criteria object to a structural plot.
- addcurvepoint
- Preselection of stress points or nodes for calculation results, with an indication of a preferred direction.
- centerlineconfig
- Creates configuration for centerlines.
- __allocmem
- Tests if it is possible to allocate a specific amount of additional memory.
- centerline
- Creates a centerline defined by a sequence of coordinates.
- clearcurvepoints
- Clears the preselected curve points.
- close
- Closes output.
- count
- Counts the number of values in an object.
- delete
- Deletes a plot or centerline.
- __dump
- Displays the details of the project.
- __dumpdisplacements
- Displays a list of all prescribed displacements.
- __dumpfixities
- Displays a list of all fixities.
- __dumpfrostlines
- Displays a list of all frost line segments.
- __dumpphreaticlevels
- Displays a list of all phreatic level segments, where each segment is shown as a pair of positions.
- __dumpwaterloads
- Displays a list of all water loads.
- echo
- Displays the details of an object.
- __exportparaview
- Tests the export of Output data to ParaView application.
- export
- Exports a plot.
- filter
- Filters a list of specified objects.
- generate
- Generates a centerline.
- getcurveresults
- Displays results for curve points that have been previously selected.
- getcurveresultspath
- Displays results for curve points that have been previously selected for several different phases.
- getresults
- Generates a table with the calculation results.
- getsingleresult
- Gives the result at the specified coordinate or a specific node/stress point with or without result smoothing.
- linecrosssectionplot
- Creates a cross section plot defined by a line between two specified points.
- hide
- Hides elements in a plot.
- index
- Displays the value at the given index.
- info
- Displays all commands and attributes for an object.
- __raise
- Generates an error in order to test the error catching functionality.
- __raiseasync
- Generates an error in an asynchronous thread in order to test the error catching functionality.
- __raisethreaded
- Generates an error in a synchronous thread in order to test the error catching functionality.
- __reportmem
- Reports memory usage
- set
- Sets one or more properties of one or more objects
- __setphysicalcpucount
- Displays or sets the amount of physical and logical CPUs.
- show
- Shows elements in a plot.
- __sleep
- Sets the number of milliseconds for computer to do nothing.
- slice
- Selects results from a list of objects with a specified criterion.
- structureplot
- Creates a plot for structural elements.
- structuralforcesplot
- Creates a plot for visualizing structural forces.
- structuralforcesinvolumepilesplot
- Creates a plot for visualizing structural force in volume piles.
- structuralforcesinvolumeplatesplot
- Creates a plot for visualizing structural force in volume plates.
- tabulate
- Displays a table with specified objects and their properties.
- __testasync
- Tests that asynchronous task execution works correctly.
- update
- Saves the selected curve points and closes output.
- view
- Changes the view of a plot.
- zoom
- Zooms in a plot.