posinterface pif
Adds positive interface features to lines.
Adds positive interface features to one or more existing lines in the geometry.
posinterface Line_1
Adds a_positive interface feature to Line_1.
posinterface Line_2 Line_3
Adds positive interface features to Line_2 and Line_3.
posinterface (Line_6 Line_4)
Adds positive interface features to Line_6 and Line_4.
<{1,...}: <Line'|Polycurve'>>'
| {1,...} 1 ∞ | Sequence of one or more lines | |
| Line | Line object reference | Name of the line to which a_positive interface feature should be added |
| Polycurve | Polycurve object reference | Name of the polycurve to which a_positive interface feature should be added |
| Mode | Target |
|---|---|
| Geometry | Global |
{1,...} PositiveInterface
Creates a line between two points (which may either exist, or will be created) and add a_positive interface feature to it.
posinterface Point_1 (5 6)
Creates a new line between Point_1 and a new point with coordinates (5, 6) and adds a_positive interface feature to it.
posinterface Point_1 Point_4
Creates a new line between Point_1 and Point_4 and adds a_positive interface feature to it.
posinterface (1 4) (6 5)
Creates a new line between two new points with coordinates (1, 4) and (6, 5) and adds a_positive interface feature to it.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'>
| Point | Point object reference | Name of the start point of the positive interface |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Point | Point object reference | Name of the end point of the positive interface |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Mode | Target |
|---|---|
| Geometry | Global |
{0..2} Point
{1} Line
{1} PositiveInterface
Creates lines between three or more points (which may either exist, or will be created) and add positive interface features to them.
posinterface Point_1 (5.1 6.4) Point_3
Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, and adds positive interface features to both lines.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>>
| Point{3,...} 3 ∞ | Sequence of three or more points | |
| Point | Point object reference | Names of the points between which the positive interface should be created |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Mode | Target |
|---|---|
| Geometry | Global |
{0,...} Point
{2,...} Line
{2,...} PositiveInterface
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length and add positive interface features to them.
posinterface 1 2 "relative" 3 4
Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6) and adds a_positive interface feature to it.
posinterface Point_1 "relative" 3 4 -5 -9 "angles" 30 16
Creates a line from Point_1 (1, 2) to a new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6). From that new point a line is created to another new point which is -5 in the x- and -9 in the y-direction from the previous point at (-1, -3). From that point a new line is created which has an angle of 30 degrees with respect to the xy-plane and a length of 16, this line ends at coordinates (12.86, 5). Adds positive interface features to all lines.
posinterface (1 2) "angles" 45 10 "absolute" (4 5)
Creates a line from a new point with coordinates (1, 2) which has an angle of 45 degrees with respect to the xy-plane and a length of 10. Then creates a line from the end point of the first line to a new point with coordinates (4, 5) and adds positive interface features to all lines.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>>
| Point | Point object reference | Point from which the _positive interface must start |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| {1,...} 1 ∞ | Sequence of one or more line sub-commands | |
| Text | "absolute" | Create a positive interface by giving absolute coordinates |
| Point{1,...} 1 ∞ | Sequence of one or more points | |
| Point | Point object reference | Point where the positive interface ends |
| Coords | Coordinates of the point where the positive interface ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "angles" | Create one or more positive interfaces by giving two angles and a length per positive interface |
| {1,...} 1 ∞ | Sequence of one or more specifications of angles and length of the positive interface or object to which the positive interface should snap | |
| Number | Angle | Angle of the positive interface with respect to the xy-plane |
| Number | Length | Length of the positive interface that should be created |
| Line | Line object reference | Name of the line to which the created positive interface should snap |
| Text | "relative" | Create one or more positive interfaces by giving relative coordinates |
| Coords{1,...} 1 ∞ | Sequence of one or more coordinates | |
| Coords | Coordinates of the point, relative to the starting point, where the positive interface ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "vector" | Create one or more positive interfaces by giving a vector and a length or object to which the positive interface should snap per positive interface |
| {1,...} 1 ∞ | Sequence of one or more vectors and length of the positive interface or object to which the positive interface should snap | |
| Coords | Vector that defines the direction of the positive interface that should be created | |
| Number | x | x-value |
| Number | y | y-value |
| Number | Length | Length of the positive interface that should be created |
| Line | Line object reference | Name of the line to which the created positive interface should snap |
| Mode | Target |
|---|---|
| Geometry | Global |
{0,...} Point
{1,...} Line
{1,...} PositiveInterface
Adds positive interface features to one or more existing lines in the geometry and directly set their properties.
posinterface Line_1 "MaterialMode" "Custom" "Material" SoilMat_1
Adds a_positive interface feature to Line_1, sets the material mode to "Custom" and the material to SoilMat_1.
posinterface (Line_2 Line_3) "MaterialMode" "Custom" "Material" SoilMat_1
Adds positive interface features to Line_2 and Line_3, sets the material mode to "Custom" and the material to SoilMat_1 for both positive interfaces.
<{1,...}: <Line'|Polycurve'>>' <PropValue{1,...}: <PropValue: Text' Any>'>
| {1,...} 1 ∞ | Sequence of one or more lines | |
| Line | Line object reference | Name of the line to which a_positive interface feature should be added |
| Polycurve | Polycurve object reference | Name of the polycurve to which a_positive interface feature should be added |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |
{1,...} PositiveInterface
Creates a line between two points (which may either exist, or will be created), add a_positive interface feature to it and directly set its properties.
posinterface Point_1 (5 6) "MaterialMode" "Custom" "Material" SoilMat_1
Creates a new line between Point_1 and a new point with coordinates (5, 6), adds a_positive interface feature to it, sets the material mode to "Custom" and the material to SoilMat_1.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'> <PropValue{1,...}: <PropValue: Text' Any>'>
| Point | Point object reference | Name of the start point of the positive interface |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Point | Point object reference | Name of the end point of the positive interface |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |
{0..2} Point
{1} Line
{1} PositiveInterface
Creates lines between three or more points (which may either exist, or will be created), add positive interface features to them and directly set their properties.
posinterface Point_1 (5.1 6.4) Point_3 "MaterialMode" "Custom" "Material" SoilMat_1
Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, adds positive interface features to both lines, sets the material mode to "Custom" and the material to SoilMat_1 for both positive interfaces.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>> <PropValue{1,...}: <PropValue: Text' Any>'>
| Point{3,...} 3 ∞ | Sequence of three or more points | |
| Point | Point object reference | Names of the points between which the positive interface should be created |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |
{0,...} Point
{2,...} Line
{2,...} PositiveInterface
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length, add positive interface features to them and directly set their properties.
posinterface 1 2 "relative" 3 4 "MaterialMode" "Custom" "Material" SoilMat_1
Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6), adds a_positive interface feature to it, sets the material mode to "Custom" and the material to SoilMat_1.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>> <PropValue{1,...}: <PropValue: Text' Any>'>
| Point | Point object reference | Point from which the _positive interface must start |
| Coords | Coordinates | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| {1,...} 1 ∞ | Sequence of one or more line sub-commands | |
| Text | "absolute" | Create a positive interface by giving absolute coordinates |
| Point{1,...} 1 ∞ | Sequence of one or more points | |
| Point | Point object reference | Point where the positive interface ends |
| Coords | Coordinates of the point where the positive interface ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "angles" | Create one or more positive interfaces by giving two angles and a length per positive interface |
| {1,...} 1 ∞ | Sequence of one or more specifications of angles and length of the positive interface or object to which the positive interface should snap | |
| Number | Angle | Angle of the positive interface with respect to the xy-plane |
| Number | Length | Length of the positive interface that should be created |
| Line | Line object reference | Name of the line to which the created positive interface should snap |
| Text | "relative" | Create one or more positive interfaces by giving relative coordinates |
| Coords{1,...} 1 ∞ | Sequence of one or more coordinates | |
| Coords | Coordinates of the point, relative to the starting point, where the positive interface ends | |
| Number | x | x-coordinate |
| Number | y | y-coordinate |
| Text | "vector" | Create one or more positive interfaces by giving a vector and a length or object to which the positive interface should snap per positive interface |
| {1,...} 1 ∞ | Sequence of one or more vectors and length of the positive interface or object to which the positive interface should snap | |
| Coords | Vector that defines the direction of the positive interface that should be created | |
| Number | x | x-value |
| Number | y | y-value |
| Number | Length | Length of the positive interface that should be created |
| Line | Line object reference | Name of the line to which the created positive interface should snap |
| PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |
| PropValue | Property-value pair | |
| Text | Property name | |
| Any | Value of the property |
| Mode | Target |
|---|---|
| Geometry | Global |
{0,...} Point
{1,...} Line
{1,...} PositiveInterface