neginterface - PLAXIS 2D Input commands documentation

neginterface nif

Adds negative interface features to lines.
Adds negative interface features to one or more existing lines in the geometry.
neginterface Line_1 Adds a_negative interface feature to Line_1.
neginterface Line_2 Line_3 Adds negative interface features to Line_2 and Line_3.
neginterface (Line_6 Line_4) Adds negative interface features to Line_6 and Line_4.
<{1,...}: <Line'|Polycurve'>>'
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a_negative interface feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a_negative interface feature should be added
Mode Target
Geometry Global
Creates a line between two points (which may either exist, or will be created) and add a_negative interface feature to it.
neginterface Point_1 (5 6) Creates a new line between Point_1 and a new point with coordinates (5, 6) and adds a_negative interface feature to it.
neginterface Point_1 Point_4 Creates a new line between Point_1 and Point_4 and adds a_negative interface feature to it.
neginterface (1 4) (6 5) Creates a new line between two new points with coordinates (1, 4) and (6, 5) and adds a_negative interface feature to it.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'>
Point Point object reference Name of the start point of the negative interface
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Point Point object reference Name of the end point of the negative interface
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Mode Target
Geometry Global
{0..2} Point {1} Line {1} NegativeInterface
Creates lines between three or more points (which may either exist, or will be created) and add negative interface features to them.
neginterface Point_1 (5.1 6.4) Point_3 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, and adds negative interface features to both lines.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the negative interface should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} NegativeInterface
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length and add negative interface features to them.
neginterface 1 2 "relative" 3 4 Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6) and adds a_negative interface feature to it.
neginterface Point_1 "relative" 3 4 -5 -9 "angles" 30 16 Creates a line from Point_1 (1, 2) to a new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6). From that new point a line is created to another new point which is -5 in the x- and -9 in the y-direction from the previous point at (-1, -3). From that point a new line is created which has an angle of 30 degrees with respect to the xy-plane and a length of 16, this line ends at coordinates (12.86, 5). Adds negative interface features to all lines.
neginterface (1 2) "angles" 45 10 "absolute" (4 5) Creates a line from a new point with coordinates (1, 2) which has an angle of 45 degrees with respect to the xy-plane and a length of 10. Then creates a line from the end point of the first line to a new point with coordinates (4, 5) and adds negative interface features to all lines.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>>
Point Point object reference Point from which the _negative interface must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a negative interface by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the negative interface ends
Coords Coordinates of the point where the negative interface ends
Number x x-coordinate
Number y y-coordinate
Text "angles" Create one or more negative interfaces by giving two angles and a length per negative interface
{1,...} 1 Sequence of one or more specifications of angles and length of the negative interface or object to which the negative interface should snap
Number Angle Angle of the negative interface with respect to the xy-plane
Number Length Length of the negative interface that should be created
Line Line object reference Name of the line to which the created negative interface should snap
Text "relative" Create one or more negative interfaces by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the negative interface ends
Number x x-coordinate
Number y y-coordinate
Text "vector" Create one or more negative interfaces by giving a vector and a length or object to which the negative interface should snap per negative interface
{1,...} 1 Sequence of one or more vectors and length of the negative interface or object to which the negative interface should snap
Coords Vector that defines the direction of the negative interface that should be created
Number x x-value
Number y y-value
Number Length Length of the negative interface that should be created
Line Line object reference Name of the line to which the created negative interface should snap
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} NegativeInterface
Adds negative interface features to one or more existing lines in the geometry and directly set their properties.
neginterface Line_1 "MaterialMode" "Custom" "Material" SoilMat_1 Adds a_negative interface feature to Line_1, sets the material mode to "Custom" and the material to SoilMat_1.
neginterface (Line_2 Line_3) "MaterialMode" "Custom" "Material" SoilMat_1 Adds negative interface features to Line_2 and Line_3, sets the material mode to "Custom" and the material to SoilMat_1 for both negative interfaces.
<{1,...}: <Line'|Polycurve'>>' <PropValue{1,...}: <PropValue: Text' Any>'>
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a_negative interface feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a_negative interface feature should be added
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
Creates a line between two points (which may either exist, or will be created), add a_negative interface feature to it and directly set its properties.
neginterface Point_1 (5 6) "MaterialMode" "Custom" "Material" SoilMat_1 Creates a new line between Point_1 and a new point with coordinates (5, 6), adds a_negative interface feature to it, sets the material mode to "Custom" and the material to SoilMat_1.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'> <PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Name of the start point of the negative interface
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Point Point object reference Name of the end point of the negative interface
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0..2} Point {1} Line {1} NegativeInterface
Creates lines between three or more points (which may either exist, or will be created), add negative interface features to them and directly set their properties.
neginterface Point_1 (5.1 6.4) Point_3 "MaterialMode" "Custom" "Material" SoilMat_1 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, adds negative interface features to both lines, sets the material mode to "Custom" and the material to SoilMat_1 for both negative interfaces.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>> <PropValue{1,...}: <PropValue: Text' Any>'>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the negative interface should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} NegativeInterface
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length, add negative interface features to them and directly set their properties.
neginterface 1 2 "relative" 3 4 "MaterialMode" "Custom" "Material" SoilMat_1 Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6), adds a_negative interface feature to it, sets the material mode to "Custom" and the material to SoilMat_1.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>> <PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Point from which the _negative interface must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a negative interface by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the negative interface ends
Coords Coordinates of the point where the negative interface ends
Number x x-coordinate
Number y y-coordinate
Text "angles" Create one or more negative interfaces by giving two angles and a length per negative interface
{1,...} 1 Sequence of one or more specifications of angles and length of the negative interface or object to which the negative interface should snap
Number Angle Angle of the negative interface with respect to the xy-plane
Number Length Length of the negative interface that should be created
Line Line object reference Name of the line to which the created negative interface should snap
Text "relative" Create one or more negative interfaces by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the negative interface ends
Number x x-coordinate
Number y y-coordinate
Text "vector" Create one or more negative interfaces by giving a vector and a length or object to which the negative interface should snap per negative interface
{1,...} 1 Sequence of one or more vectors and length of the negative interface or object to which the negative interface should snap
Coords Vector that defines the direction of the negative interface that should be created
Number x x-value
Number y y-value
Number Length Length of the negative interface that should be created
Line Line object reference Name of the line to which the created negative interface should snap
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} NegativeInterface