linedrain - PLAXIS 3D Input commands documentation

linedrain ldr

Adds line drain features to lines.
Adds line drain features to one or more existing lines in the geometry.
linedrain Line_1 Adds a line drain feature to Line_1.
linedrain Line_2 Line_3 Adds line drain features to Line_2 and Line_3.
linedrain (Line_6 Line_4) Adds line drain features to Line_6 and Line_4.
linedrain Group_1 Adds line drain features to all lines in Group_1. Group_1 should consist of only lines.
<{1,...}: <Line'|Polycurve'>>'
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a line drain feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a line drain feature should be added
Mode Target
Geometry Global
{1,...} LineDrain
Creates a line between two points (which may either exist or will be created) and adds a line drain feature to it.
linedrain Point_1 (5 6 7) Creates a new line between Point_1 and a new point with coordinates (5, 6, 7) and adds a line drain feature to it.
linedrain Point_1 Point_4 Creates a new line between Point_1 and Point_4 and adds a line drain feature to it.
linedrain (1 4 0) (6 5 8) Creates a new line between two new points with coordinates (1, 4, 0) and (6, 5, 8) and adds a line drain feature to it.
<Point'|<Coords: Number' Number' Number'>'> <Point'|<Coords: Number' Number' Number'>'>
Point Point object reference Name of the start point of the line drain
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Point Point object reference Name of the end point of the line drain
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Mode Target
Geometry Global
{0..2} Point {1} Line {1} LineDrain
Creates lines between three or more points (which may either exist or will be created) and adds line drain features to them.
linedrain Point_1 (5.1 6.4 7.2) Point_3 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4, 7.2) and one between the new point and Point_3, and adds line drain features to both lines.
<Point{3,...}: <Point'|<Coords: Number' Number' Number'>'>>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the line drain should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} LineDrain
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xz- and the xy-plane and a length or a vector describing the direction and a length and adds line drain features to them.
linedrain 1 2 0 "relative" 3 4 8 Creates a line from a new point with coordinates (1, 2, 0) to another new point which is 3 in the x-, 4 in the y- and 8 in the z-direction from the first point at (4, 6, 8) and adds a line drain feature to it.
linedrain Point_1 "relative" 3 4 8 -5 -9 10 "angles" 0 30 16 Creates a line from Point_1 (1, 2, 0) to a new point which is 3 in the x-, 4 in the y- and 8 in the z-direction from the first point at (4, 6, 8). From that new point a line is created to another new point which is -5 in the x-, -9 in the y- and 10 in the z-direction from the previous point at (-1, -3, 18). From that point a new line is created which has an angle of 0 degrees with respect to the xy-plane, an angle of 30 degrees with respect to the xz-plane and a length of 16, this line ends at coordinates (12.86, -3, 26). Adds line drain features to all lines.
linedrain (1 2 3) "angles" 45 50 10 "absolute" (4 5 6) Creates a line from a new point with coordinates (1, 2, 3) which has an angle of 45 degrees with respect to the xy-plane, an angle of 50 degrees with respect to the xz-plane and a length of 10. Then creates a line from the end point of the first line to a new point with coordinates (4, 5, 6) and adds line drain features to all lines.
linedrain Point_2 "angles" 90 0 Volume_1 Creates a line from Point_2 with an angle of 90 degrees with respect to the xy-plane, an angle of 0 degrees with respect to the xz-plane, snaps it to Volume_1 and adds line drain features to the line.
<Point'|<Coords: Number' Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) Number'(°) <Number'|<Line'|Volume'|BoreholeVolume'|StructuralSurface'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number' Number'>' <Number'|<Line'|Volume'|BoreholeVolume'|StructuralSurface'>>>'>'>>>
Point Point object reference Point from which the line drain must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a line drain by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the line drain ends
Coords Coordinates of the point where the line drain ends
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Text "angles" Create one or more line drains by giving two angles and a length per line drain
{1,...} 1 Sequence of one or more specifications of angles and length of the line drain or object to which the line drain should snap
Number Angle Angle of the line drain with respect to the xy-plane
Number Angle Angle of the line drain with respect to the xz-plane
Number Length Length of the line drain that should be created
Line Line object reference Name of the line to which the created line drain should snap
Volume Volume object reference Name of the volume to which the created line drain should snap
BoreholeVolume Soil volume object reference Name of the soil volume to which the created line drain should snap
StructuralSurface Surface object reference Name of the surface to which the created line drain should snap
Text "relative" Create one or more line drains by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the line drain ends
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Text "vector" Create one or more line drains by giving a vector and a length or object to which the line drain should snap per line drain
{1,...} 1 Sequence of one or more vectors and length of the line drain or object to which the line drain should snap
Coords Vector that defines the direction of the line drain that should be created
Number x x-value
Number y y-value
Number z z-value
Number Length Length of the line drain that should be created
Line Line object reference Name of the line to which the created line drain should snap
Volume Volume object reference Name of the volume to which the created line drain should snap
BoreholeVolume Soil volume object reference Name of the soil volume to which the created line drain should snap
StructuralSurface Surface object reference Name of the surface to which the created line drain should snap
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} LineDrain
Adds line drain features to one or more existing lines in the geometry and directly sets their properties.
linedrain Line_1 "h" 1.2 Adds a line drain feature to Line_1 and sets the head to 1.2.
linedrain (Line_2 Line_3) "h" 1.2 Adds line drain features to Line_2 and Line_3 and sets the head to 1.2 for both line drains.
<{1,...}: <Line'|Polycurve'>>'<PropValue{1,...}: <PropValue: Text' Any>'>
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a line drain feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a line drain feature should be added
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name Property name
Any Property value Property value
Mode Target
Geometry Global
{1,...} LineDrain
Creates a line between two points (which may either exist or will be created), adds a line drain feature to it and directly sets its properties.
linedrain Point_1 (5 6 7) "h" 1.2 Creates a new line between Point_1 and a new point with coordinates (5, 6, 7), adds a line drain feature to it and sets the head to 1.2.
<Point'|<Coords: Number' Number' Number'>'> <Point'|<Coords: Number' Number' Number'>'><PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Name of the start point of the line drain
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Point Point object reference Name of the end point of the line drain
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name Property name
Any Property value Property value
Mode Target
Geometry Global
{0..2} Point {1} Line {1} LineDrain
Creates lines between three or more points (which may either exist or will be created), adds line drain features to them and directly sets their properties.
linedrain Point_1 (5.1 6.4 7.2) Point_3 "h" 1.2 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4, 7.2) and one between the new point and Point_3, adds line drain features to both lines and sets the head to 1.2 for both line drains.
<Point{3,...}: <Point'|<Coords: Number' Number' Number'>'>><PropValue{1,...}: <PropValue: Text' Any>'>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the line drain should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name Property name
Any Property value Property value
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} LineDrain
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xz- and the xy-plane and a length or a vector describing the direction and a length, adds line drain features to them and directly sets their properties.
linedrain 1 2 0 "relative" 3 4 8 "h" 1.2 Creates a line from a new point with coordinates (1, 2, 0) to another new point which is 3 in the x-, 4 in the y- and 8 in the z-direction from the first point at (4, 6, 8), adds a line drain feature to it and sets the head to 1.2.
<Point'|<Coords: Number' Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) Number'(°) <Number'|<Line'|Volume'|BoreholeVolume'|StructuralSurface'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number' Number'>' <Number'|<Line'|Volume'|BoreholeVolume'|StructuralSurface'>>>'>'>>><PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Point from which the line drain must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a line drain by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the line drain ends
Coords Coordinates of the point where the line drain ends
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Text "angles" Create one or more line drains by giving two angles and a length per line drain
{1,...} 1 Sequence of one or more specifications of angles and length of the line drain or object to which the line drain should snap
Number Angle Angle of the line drain with respect to the xy-plane
Number Angle Angle of the line drain with respect to the xz-plane
Number Length Length of the line drain that should be created
Line Line object reference Name of the line to which the created line drain should snap
Volume Volume object reference Name of the volume to which the created line drain should snap
BoreholeVolume Soil volume object reference Name of the soil volume to which the created line drain should snap
StructuralSurface Surface object reference Name of the surface to which the created line drain should snap
Text "relative" Create one or more line drains by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the line drain ends
Number x x-coordinate
Number y y-coordinate
Number z z-coordinate
Text "vector" Create one or more line drains by giving a vector and a length or object to which the line drain should snap per line drain
{1,...} 1 Sequence of one or more vectors and length of the line drain or object to which the line drain should snap
Coords Vector that defines the direction of the line drain that should be created
Number x x-value
Number y y-value
Number z z-value
Number Length Length of the line drain that should be created
Line Line object reference Name of the line to which the created line drain should snap
Volume Volume object reference Name of the volume to which the created line drain should snap
BoreholeVolume Soil volume object reference Name of the soil volume to which the created line drain should snap
StructuralSurface Surface object reference Name of the surface to which the created line drain should snap
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name Property name
Any Property value Property value
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} LineDrain