lineload lld

Adds line load features to lines.
Adds line load features to one or more existing lines in the geometry.
lineload Line_1 Adds a line load feature to Line_1.
lineload Line_2 Line_3 Adds line load features to Line_2 and Line_3.
lineload (Line_6 Line_4) Adds line load features to Line_6 and Line_4.
<{1,...}: <Line'|Polycurve'>>'
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a line load feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a line load feature should be added
Mode Target
Geometry Global
{1,...} LineLoad
Creates a line between two points (which may either exist, or will be created) and add a line load feature to it.
lineload Point_1 (5 6) Creates a new line between Point_1 and a new point with coordinates (5, 6) and adds a line load feature to it.
lineload Point_1 Point_4 Creates a new line between Point_1 and Point_4 and adds a line load feature to it.
lineload (1 4) (6 5) Creates a new line between two new points with coordinates (1, 4) and (6, 5) and adds a line load feature to it.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'>
Point Point object reference Name of the start point of the line load
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Point Point object reference Name of the end point of the line load
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Mode Target
Geometry Global
{0..2} Point {1} Line {1} LineLoad
Creates lines between three or more points (which may either exist, or will be created) and add line load features to them.
lineload Point_1 (5.1 6.4) Point_3 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, and adds line load features to both lines.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the line load should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} LineLoad
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length and add line load features to them.
lineload 1 2 "relative" 3 4 Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6) and adds a line load feature to it.
lineload Point_1 "relative" 3 4 -5 -9 "angles" 30 16 Creates a line from Point_1 (1, 2) to a new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6). From that new point a line is created to another new point which is -5 in the x- and -9 in the y-direction from the previous point at (-1, -3). From that point a new line is created which has an angle of 30 degrees with respect to the xy-plane and a length of 16, this line ends at coordinates (12.86, 5). Adds line load features to all lines.
lineload (1 2) "angles" 45 10 "absolute" (4 5) Creates a line from a new point with coordinates (1, 2) which has an angle of 45 degrees with respect to the xy-plane and a length of 10. Then creates a line from the end point of the first line to a new point with coordinates (4, 5) and adds line load features to all lines.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>>
Point Point object reference Point from which the line load must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a line load by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the line load ends
Coords Coordinates of the point where the line load ends
Number x x-coordinate
Number y y-coordinate
Text "angles" Create one or more line loads by giving two angles and a length per line load
{1,...} 1 Sequence of one or more specifications of angles and length of the line load or object to which the line load should snap
Number Angle Angle of the line load with respect to the xy-plane
Number Length Length of the line load that should be created
Line Line object reference Name of the line to which the created line load should snap
Text "relative" Create one or more line loads by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the line load ends
Number x x-coordinate
Number y y-coordinate
Text "vector" Create one or more line loads by giving a vector and a length or object to which the line load should snap per line load
{1,...} 1 Sequence of one or more vectors and length of the line load or object to which the line load should snap
Coords Vector that defines the direction of the line load that should be created
Number x x-value
Number y y-value
Number Length Length of the line load that should be created
Line Line object reference Name of the line to which the created line load should snap
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} LineLoad
Adds line load features to one or more existing lines in the geometry and directly set their properties.
lineload Line_1 "qx_start" 3 "qy_start" 7 Adds a line load feature to Line_1, sets the qx,start to 3 and the qy,start to 7.
lineload (Line_2 Line_3) "qx_start" 3 "qy_start" 7 Adds line load features to Line_2 and Line_3, sets the qx,start to 3 and the qy,start to 7 for both line loads.
<{1,...}: <Line'|Polycurve'>>' <PropValue{1,...}: <PropValue: Text' Any>'>
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a line load feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a line load feature should be added
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{1,...} LineLoad
Creates a line between two points (which may either exist, or will be created), add a line load feature to it and directly set its properties.
lineload Point_1 (5 6) "qx_start" 3 "qy_start" 7 Creates a new line between Point_1 and a new point with coordinates (5, 6), adds a line load feature to it, sets the qx,start to 3 and the qy,start to 7.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'> <PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Name of the start point of the line load
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Point Point object reference Name of the end point of the line load
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0..2} Point {1} Line {1} LineLoad
Creates lines between three or more points (which may either exist, or will be created), add line load features to them and directly set their properties.
lineload Point_1 (5.1 6.4) Point_3 "qx_start" 3 "qy_start" 7 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, adds line load features to both lines, sets the qx,start to 3 and the qy,start to 7 for both line loads.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>> <PropValue{1,...}: <PropValue: Text' Any>'>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the line load should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} LineLoad
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length, add line load features to them and directly set their properties.
lineload 1 2 "relative" 3 4 "qx_start" 3 "qy_start" 7 Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6), adds a line load feature to it, sets the qx,start to 3 and the qy,start to 7.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>> <PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Point from which the line load must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a line load by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the line load ends
Coords Coordinates of the point where the line load ends
Number x x-coordinate
Number y y-coordinate
Text "angles" Create one or more line loads by giving two angles and a length per line load
{1,...} 1 Sequence of one or more specifications of angles and length of the line load or object to which the line load should snap
Number Angle Angle of the line load with respect to the xy-plane
Number Length Length of the line load that should be created
Line Line object reference Name of the line to which the created line load should snap
Text "relative" Create one or more line loads by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the line load ends
Number x x-coordinate
Number y y-coordinate
Text "vector" Create one or more line loads by giving a vector and a length or object to which the line load should snap per line load
{1,...} 1 Sequence of one or more vectors and length of the line load or object to which the line load should snap
Coords Vector that defines the direction of the line load that should be created
Number x x-value
Number y y-value
Number Length Length of the line load that should be created
Line Line object reference Name of the line to which the created line load should snap
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} LineLoad
line