# lineload lld

Adds line load features to lines.

Adds line load features to one or more existing lines in the geometry.

lineload Line_1
Adds a line load feature to Line_1.

lineload Line_2 Line_3
Adds line load features to Line_2 and Line_3.

lineload (Line_6 Line_4)
Adds line load features to Line_6 and Line_4.

<{1,...}: <Line'|Polycurve'>>'

{1,...} 1 ∞ | Sequence of one or more lines | |

Line | Line object reference | Name of the line to which a line load feature should be added |

Polycurve | Polycurve object reference | Name of the polycurve to which a line load feature should be added |

Mode | Target |
---|---|

Geometry | Global |

{1,...} LineLoad

Creates a line between two points (which may either exist, or will be created) and add a line load feature to it.

lineload Point_1 (5 6)
Creates a new line between Point_1 and a new point with coordinates (5, 6) and adds a line load feature to it.

lineload Point_1 Point_4
Creates a new line between Point_1 and Point_4 and adds a line load feature to it.

lineload (1 4) (6 5)
Creates a new line between two new points with coordinates (1, 4) and (6, 5) and adds a line load feature to it.

<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'>

Point | Point object reference | Name of the start point of the line load |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Point | Point object reference | Name of the end point of the line load |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Mode | Target |
---|---|

Geometry | Global |

Creates lines between three or more points (which may either exist, or will be created) and add line load features to them.

lineload Point_1 (5.1 6.4) Point_3
Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, and adds line load features to both lines.

<Point{3,...}: <Point'|<Coords: Number' Number'>'>>

Point{3,...} 3 ∞ | Sequence of three or more points | |

Point | Point object reference | Names of the points between which the line load should be created |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Mode | Target |
---|---|

Geometry | Global |

Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length and add line load features to them.

lineload 1 2 "relative" 3 4
Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6) and adds a line load feature to it.

lineload Point_1 "relative" 3 4 -5 -9 "angles" 30 16
Creates a line from Point_1 (1, 2) to a new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6). From that new point a line is created to another new point which is -5 in the x- and -9 in the y-direction from the previous point at (-1, -3). From that point a new line is created which has an angle of 30 degrees with respect to the xy-plane and a length of 16, this line ends at coordinates (12.86, 5). Adds line load features to all lines.

lineload (1 2) "angles" 45 10 "absolute" (4 5)
Creates a line from a new point with coordinates (1, 2) which has an angle of 45 degrees with respect to the xy-plane and a length of 10. Then creates a line from the end point of the first line to a new point with coordinates (4, 5) and adds line load features to all lines.

<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>>

Point | Point object reference | Point from which the line load must start |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

{1,...} 1 ∞ | Sequence of one or more line sub-commands | |

Text | "absolute" | Create a line load by giving absolute coordinates |

Point{1,...} 1 ∞ | Sequence of one or more points | |

Point | Point object reference | Point where the line load ends |

Coords | Coordinates of the point where the line load ends | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Text | "angles" | Create one or more line loads by giving two angles and a length per line load |

{1,...} 1 ∞ | Sequence of one or more specifications of angles and length of the line load or object to which the line load should snap | |

Number | Angle | Angle of the line load with respect to the xy-plane |

Number | Length | Length of the line load that should be created |

Line | Line object reference | Name of the line to which the created line load should snap |

Text | "relative" | Create one or more line loads by giving relative coordinates |

Coords{1,...} 1 ∞ | Sequence of one or more coordinates | |

Coords | Coordinates of the point, relative to the starting point, where the line load ends | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Text | "vector" | Create one or more line loads by giving a vector and a length or object to which the line load should snap per line load |

{1,...} 1 ∞ | Sequence of one or more vectors and length of the line load or object to which the line load should snap | |

Coords | Vector that defines the direction of the line load that should be created | |

Number | x | x-value |

Number | y | y-value |

Number | Length | Length of the line load that should be created |

Line | Line object reference | Name of the line to which the created line load should snap |

Mode | Target |
---|---|

Geometry | Global |

Adds line load features to one or more existing lines in the geometry and directly set their properties.

lineload Line_1 "qx_start" 3 "qy_start" 7
Adds a line load feature to Line_1, sets the q

_{x,start}to 3 and the q_{y,start}to 7.
lineload (Line_2 Line_3) "qx_start" 3 "qy_start" 7
Adds line load features to Line_2 and Line_3, sets the q

_{x,start}to 3 and the q_{y,start}to 7 for both line loads.
<{1,...}: <Line'|Polycurve'>>' <PropValue{1,...}: <PropValue: Text' Any>'>

{1,...} 1 ∞ | Sequence of one or more lines | |

Line | Line object reference | Name of the line to which a line load feature should be added |

Polycurve | Polycurve object reference | Name of the polycurve to which a line load feature should be added |

PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |

PropValue | Property-value pair | |

Text | Property name | |

Any | Value of the property |

Mode | Target |
---|---|

Geometry | Global |

{1,...} LineLoad

Creates a line between two points (which may either exist, or will be created), add a line load feature to it and directly set its properties.

lineload Point_1 (5 6) "qx_start" 3 "qy_start" 7
Creates a new line between Point_1 and a new point with coordinates (5, 6), adds a line load feature to it, sets the q

_{x,start}to 3 and the q_{y,start}to 7.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'> <PropValue{1,...}: <PropValue: Text' Any>'>

Point | Point object reference | Name of the start point of the line load |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Point | Point object reference | Name of the end point of the line load |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |

PropValue | Property-value pair | |

Text | Property name | |

Any | Value of the property |

Mode | Target |
---|---|

Geometry | Global |

Creates lines between three or more points (which may either exist, or will be created), add line load features to them and directly set their properties.

lineload Point_1 (5.1 6.4) Point_3 "qx_start" 3 "qy_start" 7
Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, adds line load features to both lines, sets the q

_{x,start}to 3 and the q_{y,start}to 7 for both line loads.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>> <PropValue{1,...}: <PropValue: Text' Any>'>

Point{3,...} 3 ∞ | Sequence of three or more points | |

Point | Point object reference | Names of the points between which the line load should be created |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |

PropValue | Property-value pair | |

Text | Property name | |

Any | Value of the property |

Mode | Target |
---|---|

Geometry | Global |

Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length, add line load features to them and directly set their properties.

lineload 1 2 "relative" 3 4 "qx_start" 3 "qy_start" 7
Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6), adds a line load feature to it, sets the q

_{x,start}to 3 and the q_{y,start}to 7.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>> <PropValue{1,...}: <PropValue: Text' Any>'>

Point | Point object reference | Point from which the line load must start |

Coords | Coordinates | |

Number | x | x-coordinate |

Number | y | y-coordinate |

{1,...} 1 ∞ | Sequence of one or more line sub-commands | |

Text | "absolute" | Create a line load by giving absolute coordinates |

Point{1,...} 1 ∞ | Sequence of one or more points | |

Point | Point object reference | Point where the line load ends |

Coords | Coordinates of the point where the line load ends | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Text | "angles" | Create one or more line loads by giving two angles and a length per line load |

{1,...} 1 ∞ | Sequence of one or more specifications of angles and length of the line load or object to which the line load should snap | |

Number | Angle | Angle of the line load with respect to the xy-plane |

Number | Length | Length of the line load that should be created |

Line | Line object reference | Name of the line to which the created line load should snap |

Text | "relative" | Create one or more line loads by giving relative coordinates |

Coords{1,...} 1 ∞ | Sequence of one or more coordinates | |

Coords | Coordinates of the point, relative to the starting point, where the line load ends | |

Number | x | x-coordinate |

Number | y | y-coordinate |

Text | "vector" | Create one or more line loads by giving a vector and a length or object to which the line load should snap per line load |

{1,...} 1 ∞ | Sequence of one or more vectors and length of the line load or object to which the line load should snap | |

Coords | Vector that defines the direction of the line load that should be created | |

Number | x | x-value |

Number | y | y-value |

Number | Length | Length of the line load that should be created |

Line | Line object reference | Name of the line to which the created line load should snap |

PropValue{1,...} 1 ∞ | Sequence of one or more property-value pairs | |

PropValue | Property-value pair | |

Text | Property name | |

Any | Value of the property |

Mode | Target |
---|---|

Geometry | Global |