addedmass - PLAXIS 2D Input commands documentation

addedmass am

Adds Westergaard AddedMass feature features to lines.
Adds Westergaard AddedMass feature features to one or more existing lines in the geometry.
addedmass Line_1 Adds a Westergaard AddedMass feature feature to Line_1.
addedmass Line_2 Line_3 Adds Westergaard AddedMass feature features to Line_2 and Line_3.
addedmass (Line_6 Line_4) Adds Westergaard AddedMass feature features to Line_6 and Line_4.
<{1,...}: <Line'|Polycurve'>>'
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a Westergaard AddedMass feature feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a Westergaard AddedMass feature feature should be added
Mode Target
Geometry Global
{1,...} AddedMass
Creates a line between two points (which may either exist, or will be created) and add a Westergaard AddedMass feature feature to it.
addedmass Point_1 (5 6) Creates a new line between Point_1 and a new point with coordinates (5, 6) and adds a Westergaard AddedMass feature feature to it.
addedmass Point_1 Point_4 Creates a new line between Point_1 and Point_4 and adds a Westergaard AddedMass feature feature to it.
addedmass (1 4) (6 5) Creates a new line between two new points with coordinates (1, 4) and (6, 5) and adds a Westergaard AddedMass feature feature to it.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'>
Point Point object reference Name of the start point of the Westergaard AddedMass feature
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Point Point object reference Name of the end point of the Westergaard AddedMass feature
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Mode Target
Geometry Global
{0..2} Point {1} Line {1} AddedMass
Creates lines between three or more points (which may either exist, or will be created) and add Westergaard AddedMass feature features to them.
addedmass Point_1 (5.1 6.4) Point_3 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, and adds Westergaard AddedMass feature features to both lines.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the Westergaard AddedMass feature should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} AddedMass
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length and add Westergaard AddedMass feature features to them.
addedmass 1 2 "relative" 3 4 Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6) and adds a Westergaard AddedMass feature feature to it.
addedmass Point_1 "relative" 3 4 -5 -9 "angles" 30 16 Creates a line from Point_1 (1, 2) to a new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6). From that new point a line is created to another new point which is -5 in the x- and -9 in the y-direction from the previous point at (-1, -3). From that point a new line is created which has an angle of 30 degrees with respect to the xy-plane and a length of 16, this line ends at coordinates (12.86, 5). Adds Westergaard AddedMass feature features to all lines.
addedmass (1 2) "angles" 45 10 "absolute" (4 5) Creates a line from a new point with coordinates (1, 2) which has an angle of 45 degrees with respect to the xy-plane and a length of 10. Then creates a line from the end point of the first line to a new point with coordinates (4, 5) and adds Westergaard AddedMass feature features to all lines.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>>
Point Point object reference Point from which the Westergaard AddedMass feature must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a Westergaard AddedMass feature by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the Westergaard AddedMass feature ends
Coords Coordinates of the point where the Westergaard AddedMass feature ends
Number x x-coordinate
Number y y-coordinate
Text "angles" Create one or more Westergaard AddedMass features by giving two angles and a length per Westergaard AddedMass feature
{1,...} 1 Sequence of one or more specifications of angles and length of the Westergaard AddedMass feature or object to which the Westergaard AddedMass feature should snap
Number Angle Angle of the Westergaard AddedMass feature with respect to the xy-plane
Number Length Length of the Westergaard AddedMass feature that should be created
Line Line object reference Name of the line to which the created Westergaard AddedMass feature should snap
Text "relative" Create one or more Westergaard AddedMass features by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the Westergaard AddedMass feature ends
Number x x-coordinate
Number y y-coordinate
Text "vector" Create one or more Westergaard AddedMass features by giving a vector and a length or object to which the Westergaard AddedMass feature should snap per Westergaard AddedMass feature
{1,...} 1 Sequence of one or more vectors and length of the Westergaard AddedMass feature or object to which the Westergaard AddedMass feature should snap
Coords Vector that defines the direction of the Westergaard AddedMass feature that should be created
Number x x-value
Number y y-value
Number Length Length of the Westergaard AddedMass feature that should be created
Line Line object reference Name of the line to which the created Westergaard AddedMass feature should snap
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} AddedMass
Adds Westergaard AddedMass feature features to one or more existing lines in the geometry and directly set their properties.
addedmass Line_1 "PositiveWBL" 1.5 Adds a Westergaard AddedMass feature feature to Line_1 and sets the Positive Water Base Level to 1.5.
addedmass (Line_2 Line_3) "PositiveWBL" 1.5 Adds Westergaard AddedMass feature features to Line_2 and Line_3 and sets the Positive Water Base Level to 1.5 for both Westergaard AddedMass features.
<{1,...}: <Line'|Polycurve'>>' <PropValue{1,...}: <PropValue: Text' Any>'>
{1,...} 1 Sequence of one or more lines
Line Line object reference Name of the line to which a Westergaard AddedMass feature feature should be added
Polycurve Polycurve object reference Name of the polycurve to which a Westergaard AddedMass feature feature should be added
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{1,...} AddedMass
Creates a line between two points (which may either exist, or will be created), add a Westergaard AddedMass feature feature to it and directly set its properties.
addedmass Point_1 (5 6) "PositiveWBL" 1.5 Creates a new line between Point_1 and a new point with coordinates (5, 6), adds a Westergaard AddedMass feature feature to it and sets the Positive Water Base Level to 1.5.
<Point'|<Coords: Number' Number'>'> <Point'|<Coords: Number' Number'>'> <PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Name of the start point of the Westergaard AddedMass feature
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
Point Point object reference Name of the end point of the Westergaard AddedMass feature
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0..2} Point {1} Line {1} AddedMass
Creates lines between three or more points (which may either exist, or will be created), add Westergaard AddedMass feature features to them and directly set their properties.
addedmass Point_1 (5.1 6.4) Point_3 "PositiveWBL" 1.5 Creates two lines, one between Point_1 and a new point with coordinates (5.1, 6.4) and one between the new point and Point_3, adds Westergaard AddedMass feature features to both lines and sets the Positive Water Base Level to 1.5 for both Westergaard AddedMass features.
<Point{3,...}: <Point'|<Coords: Number' Number'>'>> <PropValue{1,...}: <PropValue: Text' Any>'>
Point{3,...} 3 Sequence of three or more points
Point Point object reference Names of the points between which the Westergaard AddedMass feature should be created
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0,...} Point {2,...} Line {2,...} AddedMass
Creates one or more lines by either giving absolute coordinates or relative coordinates, by giving the angles with respect to the xy-plane and a length or a vector describing the direction and a length, add Westergaard AddedMass feature features to them and directly set their properties.
addedmass 1 2 "relative" 3 4 "PositiveWBL" 1.5 Creates a line from a new point with coordinates (1, 2) to another new point which is 3 in the x- and 4 in the y-direction from the first point at (4, 6), adds a Westergaard AddedMass feature feature to it and sets the Positive Water Base Level to 1.5.
<Point'|<Coords: Number' Number'>'> <{1,...}: <<<Text: "absolute"> <Point{1,...}: <Point'|<Coords: Number' Number'>'>>>|<<Text: "angles"> <{1,...}: <Number'(°) <Number'|<Line'>>>'>>|<<Text: "relative"> <Coords{1,...}: <Coords: Number' Number'>'>>|<<Text: "vector"> <{1,...}: <<Coords: Number' Number'>' <Number'|<Line'>>>'>'>>> <PropValue{1,...}: <PropValue: Text' Any>'>
Point Point object reference Point from which the Westergaard AddedMass feature must start
Coords Coordinates
Number x x-coordinate
Number y y-coordinate
{1,...} 1 Sequence of one or more line sub-commands
Text "absolute" Create a Westergaard AddedMass feature by giving absolute coordinates
Point{1,...} 1 Sequence of one or more points
Point Point object reference Point where the Westergaard AddedMass feature ends
Coords Coordinates of the point where the Westergaard AddedMass feature ends
Number x x-coordinate
Number y y-coordinate
Text "angles" Create one or more Westergaard AddedMass features by giving two angles and a length per Westergaard AddedMass feature
{1,...} 1 Sequence of one or more specifications of angles and length of the Westergaard AddedMass feature or object to which the Westergaard AddedMass feature should snap
Number Angle Angle of the Westergaard AddedMass feature with respect to the xy-plane
Number Length Length of the Westergaard AddedMass feature that should be created
Line Line object reference Name of the line to which the created Westergaard AddedMass feature should snap
Text "relative" Create one or more Westergaard AddedMass features by giving relative coordinates
Coords{1,...} 1 Sequence of one or more coordinates
Coords Coordinates of the point, relative to the starting point, where the Westergaard AddedMass feature ends
Number x x-coordinate
Number y y-coordinate
Text "vector" Create one or more Westergaard AddedMass features by giving a vector and a length or object to which the Westergaard AddedMass feature should snap per Westergaard AddedMass feature
{1,...} 1 Sequence of one or more vectors and length of the Westergaard AddedMass feature or object to which the Westergaard AddedMass feature should snap
Coords Vector that defines the direction of the Westergaard AddedMass feature that should be created
Number x x-value
Number y y-value
Number Length Length of the Westergaard AddedMass feature that should be created
Line Line object reference Name of the line to which the created Westergaard AddedMass feature should snap
PropValue{1,...} 1 Sequence of one or more property-value pairs
PropValue Property-value pair
Text Property name
Any Value of the property
Mode Target
Geometry Global
{0,...} Point {1,...} Line {1,...} AddedMass